ISSN print edition: 0366-6352
ISSN electronic edition: 1336-9075
Registr. No.: MK SR 9/7

Published monthly
 

Utilization of Simulation Programs for Design of Biological Units for Nitrogen Removal

J. Derco and A. Kovács

Department of Environmental Science, Faculty of Chemical and Food Technology, Slovak University of Technology, SK-812 37 Bratislava

 

E-mail: derco@chtf.stuba.sk

Received: 14 June 1999  Accepted: 29 June 2001

Abstract: The procedure of the utilization of dynamic simulation programs for design and upgrading of biological processes of nitrogen removal is presented. An upgrading of nitrification reactor to predenitrification system is illustrated. Design calculations were performed according to steady-state design practice. An optimization procedure for calculation of volume of denitrification reactor was developed. Minimizing of differences between required and calculated values of denitrified nitrogen is the merit of the applied method. Dynamic simulations were used for optimization of the dimensions of nitrification and denitrification reactors with regard to effluent standard values and fluctuations of wastewater flow and composition. A method for evaluation of dynamic simulation of results with respect to dynamic nature of wastewater effluent standards is suggested.

Full paper in Portable Document Format: 562a117.pdf

 

Chemical Papers 56 (2) 117–122 (2002)

Wednesday, November 25, 2020

IMPACT FACTOR 2019
1.680
SCImago Journal Rank 2019
0.331
SEARCH
Advanced
VOLUMES
© 2020 Chemical Papers